Stories about Wireless Adapter /Simulator/Turnigy9x Transmitter/Smartpropo and PPJOY

Beginner who what  learn R/C helicopter and plane, simulator is a must, it can save your pennies and can teach u to coordinate skill and hand movement, and save u from the tension when outside is raining especially in the evening at Malaysia,

For now i still training to fly 450 size helicopter at simulator for prepare to fly a real one. The simulator that i use is Pheonix simulator because everybody recommended this simulator is good for training 6 channel helicopter. The downside is i dont have a proper usb dongle, and Pheonix simulator had a protection program that cannot start unless a proper USB dongle is inserted.  After that i research to r/c forum that is another way to play Pheonix simulator by using

-          Audio Cable (male to male)

-          Smart Propo Application

-          PPJoy Application

The Audio cable is to connect your tx trainer port and PC line-in port, Smartpropo is convert audio cable to Joystick signal and PPJoy is use to mapping the control, is the setup is properly done, u can see on windows joystick confiq that ur tx is now standard PC joystick. Now u have to search Pheonix simulator with Cr*ck with it. and run the simulator using cr*ck

the downside for this method is not suitable for beginner to  setup and use.

  

If you are using a Wireless Adapter, what do you need is your receiver  only .. and connect the USB cable that came with the wireless adapter,

 after all the wiring connected to the wireless adapter and the receiver, select the type of simulator labeled at the wireless adapter and select the wireless option ,

 and then connect mini usb to usb adapter into the slot and PC, make sure you've installed one of the simulators like Pheonix

 I do not know maybe I was lucky, pheonix simulator  can detect all the channel , now just follow the channel mapping settings specified, Now by using a wireless adapter, you now free to move  and no longer bothered with wiring,

My room and my store

Hi fellow readers..this is my room, as u can see i have many 3D plane n profile plane but i am not skilled enough...maybe next week i will buy a new plane to exchange my 3D plane

How to build profile RC Jet -SU 37- Part One

Today i wanna replace my  MIG29 profile that had crashed and smashed to ground. I wanna fly different kind of r/c jetplane so i choose a new Russian Jet named SU -37, it had a canard in a front and streamline design that i like...

so readers if u wanna make one just like me, follow my instruction.

Before we started. This are the list things needed to build SU-37 kit not including electronic yet..

-.2  Big Foam Board  6 mm density
- Sharp Knife
- Fiber Tape/Selotape or any tape that suitable
- Hot glue gun and a couple hot glue stick
- Pin to hold the plans
- ball point pen
- carbon rod or bamboo stick for spar

First u will need a plan to make one design or template , the source of template that i get is from this website

   http://rc.tomhe.net

the website contain instruction, guide and lots of model to choose from like F22 raptor, the famous MIG29 and of course russians SU-37. Just download the plane plan in pdf format and choose tiled version if u wanna use home printer and A4 paper. Make sure u choose scale to none at printer dropbox menu to get right measurement for the plans.

After u download and print the plans for SU-37, attach the plans in rows by glue it. after the big plans is completely dried. Cut the plane parts in that plans using sharp knife

and transfer all the paper templates to depron.

By using ball point pen to make line and shape of the plane to foam board guided from the paper cutout, after complete,

using sharp knife cut all the plane parts at the foam boards into several parts like pic below

Now after finished cut all the parts, take hotglue gun and glue all the parts especially the fuselage and body of the plane until look like this

Continue in Part 2